Proper Steps To Clean Carpets, Orange County CA

This is part two of a three-part article.

Regardless of what carpet cleaning method a facility uses, the “more is better” mindset is still prevalent in many custodial departments and can be detrimental to both the appearance and longevity of the carpet. Excess cleaning chemicals can exacerbate re-soiling, while oversaturating the carpet can causes odors and even mold issues.

“In the past the thinking has been ‘more is better’ — and I’ve been guilty of this, too,” admits McGarvey. “But when we load these carpets up with chemicals, we tend to see resoiling happening more quickly, and it degrades the appearance of the carpet a lot sooner than it should.”

In addition to following equipment manufacturer’s instructions for chemical usage, consultants advise users to rinse chemicals from the carpet thoroughly following hot water extraction, as well as low moisture options — particularly when applying the cleaning product to the carpet via the machine’s tank. The same holds true for interim cleaning methods such as encapsulation.

“When you use an encapsulation system, it’s important to remove the compound because, if you don’t, it will take the dirt off your shoes and leave it in the carpet,” says Bigger.

Just as chemicals need to be removed thoroughly from the carpet after cleaning, custodians need to recover as much water as possible from the carpet and avoid over-wetting it — a mistake that often occurs when dealing with high-traffic areas or stubborn stains.

“Make sure that you get the carpet dry, preferably in four to six hours,” says McGarvey. “Beyond 24 hours, you run the risk of mold growing.”

Air movement and carpet blowers can help to speed up the process, but staff should also check that carpet equipment is in good working order. A clogged vacuum, for instance, may not recover water properly, resulting in longer dry times. Jets should also be flushed on a regular basis to ensure that they don’t get clogged.

“A lot of times, custodians turn on the machine and hear the vacuum or pump and assume it’s working,” says Griffin. “But just because it’s making noise doesn’t mean it’s working properly. You want to inspect it regularly to make sure you’re getting proper flow of the jets and proper suction of the vacuum.”

In addition, tanks should be emptied and rinsed after each use and allowed to air dry to avoid odor problems caused by bacterial growth.

/0 Comments/by

Biggest Carpet Care Mistakes, Orange County, CA

It is often said that we learn from our mistakes. But when it comes to carpet care, there is no room for error. Using the wrong products or processes can result in permanent damage, impacting the carpet’s appearance and lifespan. But perhaps the greatest mistake of all, according to industry experts, is failure to implement a carpet maintenance program in the first place.

“Not having a proactive maintenance program for soft flooring is the downfall of many facilities,” notes Bill McGarvey, director of training and sustainability for Philip Rosenau Co., Warminster, Pennsylvania. “People wait until the carpets look dirty to clean them, but the problem is carpeting has been designed intentionally to hide the soil. So if we wait until it looks dirty to clean it, then how dirty is it really?”

Like McGarvey, Bill Griffin, president of Cleaning Consultant Services in Seattle, believes that the lack of a carpet maintenance program, including a regular cleaning schedule, is one of the biggest mistakes a facility can make. He also stresses the need for a comprehensive approach when planning and implementing a program.

“People often implement one element of a maintenance program and think that they have a good program in place,” says Griffin. “For instance, they may have low moisture cleaning, but they don’t have deep extraction to go with it. Or they do spotting, but don’t do any deep cleaning. They need a program that has all the elements necessary to give their carpet an effective cleaning, a long life, and a good appearance.”

A Case Of Mistaken Identity

In conjunction with a good carpet maintenance program, facility cleaning managers should familiarize their staff with the carpet manufacturer’s specifications — an element that is often overlooked in carpet care.

“When you look at carpet cleaning, it doesn’t start with the cleaning itself; it starts with the specification and installation of the carpet,” says Griffin. “Even though it’s not something we control directly, different fibers and construction methods impact how we should maintain or spot clean that carpet.”

John Poole, senior consultant for the American Institute of Cleaning Sciences in Atlanta, concurs.

“What people need to know in facilities — and they don’t — is who manufactured the carpet and what kind of carpet they’re dealing with,” he says. “You need to know the specifications so that you know how to maintain it, and you don’t violate the warranty.”

In addition to obtaining manufacturer’s specifications, consultants recommend that custodial workers attend training programs to learn how to identify and evaluate different fibers, which in turn will help them determine the best processes and chemicals for spot treatment, as well as interim and deep cleaning.

“If you don’t know what type of carpet you’re dealing with, you can create a mess,” warns Poole. “For instance, natural fibers will shrink, so it’s imperative to identify the type of carpet you’re dealing with.”

Just as different carpet fibers require different cleaning methods, spills and spots require different cleaning chemicals based on their pH level.

“If I treat a spot with the wrong product, I can take a dime- or quarter-size spot and turn it into a one-foot diameter stain,” says Mickey Crowe, trainer and consultant for CleenTech Consulting Group, Woodstock, Georgia. “If you can identify what the spot is, you’ll know whether to use an acid-based cleaner or an alkaline-based cleaner to attack it.”

When in doubt, Alan Bigger, APPA fellow and facilities management consultant, South Bend, Indiana, suggests testing any chemicals first before applying them directly to the soiled area.

“One of the mistakes people make is they don’t check their chemicals on the carpet in an inconspicuous place, so when they apply them, they might bleach out the carpet.” he says. “Make sure you test any cleaning chemicals or solvents under a desk or in a corner first.”

Bigger also suggests addressing the spot as quickly as possible and avoiding the urge to rub it.

“Blot or remove the excess, and then start from the outside and work inward,” he advises. “And don’t try to rub it because it will spread farther.”

/0 Comments/by

Love Our Pets, Hate the Mess, Orange County, CA

Love Our Pets, Hate the Mess, Orange County, CA

At-home urine removal for cats & dogs.

We all love our pets, but they tend to be pretty messy at times. It happens to all pet owners. Whether they are an adorable new puppy, nervous, untrained, or just have bad manners, pets will usually find a way to stain your carpets. Below, we have provided some simple solutions for removing pet urine. And don’t forget to call Evergreen for an estimate for regular deep cleans.

Cats:

Use vinegar to kill bacteria associated with cat urine. Cats hate the smell of vinegar. If your cat has an area of the house that he or she particularly likes to urinate in, spray a small amount of vinegar on the affected area.  The vinegar not only disinfects the carpet, but also deters the cat from urinating there again.  Not to worry, the smell of vinegar will soon fade.

Dogs:

Try to soak up the urine with a dry paper towel as soon as you can.  Blot the stain with a damp paper towel once the urine has been soaked up. Baking soda is the most effective way to remove dog odors and can be applied to most upholstery. Use a cleaning brush to spread the baking soda around the fabric and allow the baking soda to sit over night so it can properly absorb the odor.

Most importantly, the tips we provided above are completely safe to use around our pets. If you choose to use perfumes to help neutralize the smell, always make sure that the spray is non-toxic to animals. Many products that may be safe for humans are not safe for our pets. Always check to make sure your scented candles, sprays and plug-ins are pet safe.

/0 Comments/by