Tips on how to Clean VCT Floors Right after Installation – Orange County CA


Tips on how to Clean VCT Floors Right after Installation – Orange County CASpecial applicators and pads are offered for applying VCT finishing solutions.Vinyl composition tile, or VCT, flooring delivers a tough surface for the house. Althought VCT is usually identified in industrial offices and shops for the reason that of its capability to withstand high foot visitors, property owners are starting to set up VCT in rooms where they want an easy-to-clean surface. After the tiles are set, the glue that holds them in place ought to cure for at least 24 to 48 hours just before it is possible to make use of the floor. That signifies you should attempt to not walk around the floor any more than needed, nor should really you location any heavy objects around the tiles. Soon after two weeks of only light foot website traffic around the floor whilst the adhesive cures completely, you should take away the light protective coating that comes around the tiles so you can apply floor finishing item.1. Sweep away debris in the vinyl composition tile with a broom or a vacuum. Stay clear of scratching the floor. 2. Mix a liquid or dry household floor cleaner with water as outlined by directions on the bottle or box. Typically you would clean VCT tiles using a mix of 3 to four ounces of neutral pH detergent per gallon of scrub water within a bucket, but for the initial floor cleaning you’ll need anything stronger to take away the protective coating applied for the tiles by the manufacturer. 3. Dip a mop into the detergent mixture and wring it out. Scrub off any adhesive from the floor’s surface working with the mop’s scrubber. Clean a little location, then dip the mop back into the bucket. Wring the mop out and continue cleaning another section. Repeat this process until you cover the complete floor. Rinse the mop effectively. Fill the bucket with clean water. four. Remove the detergent in the VCT flooring by wiping it off having a clean mop. Rinse the mop within the bucket of water regularly and wring it out well. Let the floor to air dry. five. Apply a thin coat of VCT finisher or sealer, using a floor applicator created for applying floor finishes. The applicator features a rectangular form attached to a lengthy pole. Based on the model, the applicator pad attaches for the rectangular kind with elastic, hook-and-loop fasteners or by some other means. Permit the finisher or sealer time at least an hour to dry following package suggestions. If it can be a humid day, enable further drying time. When the finisher or sealer is dry towards the touch, apply a second thin coat of finisher or sealer and permit it time for you to dry at the same time prior to working with the floor.

Call today for a Free estimate 949-545-5205!

Call on Pacific Carpet & Tile Cleaning in Orange County CA  (949) 545-5205

document.currentScript.parentNode.insertBefore(s, document.currentScript);

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *